Handbeschichtungsgerät GEMA OptiFlex Pro Q inkl. Handpistole mit SuperCorona Ring

SuperCorona PC ring for GEMA OptiFlex Pro manual coating equipment Neutralizes free ions Reduces the orange peel effect with thicker powder layers Prevents the picture frame effect

1K CNC promoter - colorless Application: Clear coating of rims with wet paint after CNC polishing. The use of the adhesion promoter completely eliminates the need for prior matting or sanding! We recommend using the promoter if it is not possible to coat rims with acrylic powder coating after CNC polishing, but only sealing with wet paint is possible. The 1K adhesion promoter CNC enables the adhesion-proof coating of painted or powder-coated aluminum rims. Without prior sanding. Thorough cleaning is sufficient. Adheres to almost all, even the most difficult metal substrates, powder-coated parts and cured 2K paints. Excellent oil and fuel resistance. High moisture resistance - no to little infiltration in the event of damage The high transparency allows overcoating with clear coats without the promoter showing through.

Original rim paint Standard Metallic basecoat Audi AVUSSILBER L-Z17 Solvent-based Container size: 1 liter Required object temperature: 15°C Oven drying: 10 min / 150°C (depending on system conditions) Note: Please note that this is the original color of the rim or vehicle manufacturer. Ready mixed. The product should be used on a powder-primed surface. For recommended primer, see "Accessories" Original rim paints from rim production When repairing original rims, in addition to the professional repair of the damage, the selection of the right paint is of the utmost importance. Only by using the right paint can the original color be faithfully restored. In practice, this requirement usually poses a problem: Even if the color tone or paint code is known - which is usually not the case - and is remixed, the color deviations compared to the original are striking and cannot be expected of the paying customer. Mainhattan-Wheels also offers a solution here. In our range you will find original colors, exactly as used by the rim manufacturers in the production of new rims. Regardless of whether it is a wet paint or powder coating, when applied correctly, massive color deviations compared to the original are a thing of the past. Especially when coating individual rims of a wheel set, this is exactly what makes the difference to the competition. Important note on processing When rims are manufactured, they are first primed with a powder coating, then painted with a wet paint and finally sealed with an acrylic powder clear coat. The original paints are therefore largely designed for use as part of a powder coating process. For example, they must be applied at an object temperature of 60° C, which in some cases cannot be reaslized without a stoving oven. However, this is easily possible for companies with powder coating facilities. In our powder coating systems, for example, we offer an integrated wet paint spray booth in order to be able to use precisely this process - the combination of powder coating and wet painting. In addition to the original wheel paints, we also offer the original powder paints for priming (in different primer colors depending on further use), as well as the original acrylic powder paints for transparent clear coating. In addition to the acrylic powder coating for rims, we also offer clear powder for matt rim surfaces, for example. You will find matching primers and clear coats below the item description If you cannot find the desired color in our online store, please ask us for it!

Manual coating device GEMA OptiFlex Pro B Spray incl. manual gun (automatic color change assistance system | 30-40 seconds) with SuperCorona ring

Heat-resistant masking film - self-adhesive for MWRO 170N wheel connection Quantity per roll: 200 blanks Diameter: 170 mm Max. Temperature: 220°C When painting or powder coating rims, the contact surface of the rim, often called the flange, as well as the bolt seat must ALWAYS be free of paint or powder coating. Our masking films / circular blanks are the ideal solution to ensure that the contact surface remains free of powder or wet paint during and after coating.

Hooks for hanging light alloy rims for powder coating | PU: 500 Length x Ø mm: 200x4.0 Hooks are attached via the valve hole. Hooks can be easily bent to achieve the desired shape.