28" Felgen Vorbereitungsdrehtisch MW-RT1

Heat-resistant PET masking tape for powder coating - Self-adhesive Width: 16mm Roll length: 66m Max. Temperature: 220°C For masking areas not to be coated during powder coating. Easy to apply, high adhesive strength, residue-free removal after the stoving process. Ideal for masking motorcycle rims (threaded holes, brake disk contact surface) or small parts.

Heat-resistant masking film - self-adhesive for MWRO 150N wheel connection Quantity per roll: 200 discs Diameter: 150 mm Max. Temperature: 220°C When painting or powder coating rims, the contact surface of the rim, often called the flange, as well as the bolt seat must ALWAYS be free of paint or powder coating. Our masking films / circular blanks are the ideal solution to ensure that the contact surface remains free of powder or wet paint during and after coating.

Scalpel MW "Orange" for the masking / preparation of rims incl. 1x scalpel blade Blade shape: 11 When coating rims with wet or powder paint, the contact surface of the rim, often called the flange, must always be free of paint or powder paint. We offer you our masking foils / circular blanks in various sizes for this purpose. The scalpel with its particularly sharp blade is the ideal complement for cutting the masking film precisely and cleanly.

Acrylic clear powder MW-AC1 | Wheel powder high gloss | OE standard Container size: 18kg Curing conditions: Recommended curing temperature: (160°C / 29 min.) | (170°C / 20 min.) | (180°C / 13 min.) | (190°C / 8 min.) | (195°C / 7 min.) Note: Storage conditions 5° to 23° Celsius Note: Powder coating for the coating of rims The powder coatings from our range are used both in the in-house production of new rims and in rim reconditioning. All powder coatings for rims are weatherproof and UV-resistant

Felgenwagen MW140 Black Rollbar - flexibel, mobil und felgenschonend. Lagern und transportieren Sie Ihre Felgen jetzt noch sicherer und komfortabler! Konstruktion Robuster Stahlrahmen, fahrbar auf 4 Rollen (davon 2 Lenkrollen mit Bremse für sicheren Stand). Lagerebenen Der Felgenwagen bietet maximale Flexibilität dank seiner 3 variabel einstellbaren Lagerebenen. 3 Lagerebenen, davon 2 höhenverstellbar und alle 3-fach tiefenverstellbar - ideal für unterschiedliche Felgengrößen. Felgenschonend Die gummiumantelten Ablagen schützen empfindliche Oberflächen zuverlässig vor Kratzern und Beschädigungen. Mobilität Vier hochwertige Rollen, davon 2 Lenkrollen mit Bremse, sorgen für volle Beweglichkeit und gleichzeitig einen sicheren Stand beim Be- und Entladen. Die Vorteile auf einen Blick 3 Lagerebenen, individuell einstellbar Schonende, gummierte Auflagen für optimalen Felgenschutz Mobil durch 4 Rollen, davon 2 gebremst Robuste, langlebige Konstruktion 4x Dokumententasche Schneller Zugriff und sichere Aufbewahrung Technische Daten: Tragfähigkeit insgesamt: 480 kg Tragfähigkeit pro Ebene: 160 kg Abmessungen (LxBxH): 1.460 x 600 x 2.175 mm Mit diesem praktischen Helfer organisieren Sie Ihre Felgenlagerung professionell und platzsparend - ob in der Werkstatt, im Lager oder im Showroom. Auch als Reifenregalwagen für Transport und Lagerung von Reifen im Autohaus, Werkstatt oder im Reifenhandel geeignet.   

Heat-resistant masking film - self-adhesive for MWRO 150N wheel connection Quantity per roll: 200 discs Diameter: 150 mm Max. Temperature: 220°C When painting or powder coating rims, the contact surface of the rim, often called the flange, as well as the bolt seat must ALWAYS be free of paint or powder coating. Our masking films / circular blanks are the ideal solution to ensure that the contact surface remains free of powder or wet paint during and after coating.

IPG LightWELD WF-100 Drahtförderer für IPG LightWELD 1500 XC Laserschweißgerät für Aluminiumfelgen für Drahtstärken 1,2mm und 1,6mm   

Clamp holder (25x180) - cutting edge left (101) Special design for bright turning of rims G1/8 angle screw connection IK via clamping finger Length L=180 Diameter 25mm Torque clamping screw: 7Nm Note: The turning tool for rims is water-carrying. For connection to the emulsion circuit, the water connection set "CNC-WA-SET-TOOL-D06" is required!

Mainhattan-Wheels CNC optimization software "OPT2CUT pro" for adjusting wheel contours during wheel polishing Internet-based / browser-based | license for 12 months See for yourself. Take advantage of our 4-week free trial period! Fully automatic smoothing function Z-correction for "uneven overturning" "Wheel center" extension "Rim flange" extension Add, move and delete points manually Views, point sizes, line thicknesses and colors can be set as required Export function with selection of tool, speed, feed rate Automatic file naming incl. automatic updates Available in German, English, French, Spanish, Dutch, Italian, Polish, Turkish and Portuguese OPT2CUT is a powerful contour optimization software that makes it easy to make all the necessary adjustments to previously recorded rim contours. For the first time, interpolation and smoothing is fully automated, significantly reducing the previous optimization effort. The program can also be perfectly adapted to the needs of the operator in all areas. The special feature of OPT2CUT is the consideration of daily problems from the practice of subsequent burnishing of rims. Smoothing wheel contours When capturing wheel contours, firstly, any unevenness in the clear coat is also captured and secondly, the surface is usually measured at a specific point distance. The result is a contour that cannot be used for wheel polishing without additional smoothing. The quality of the smoothing function was therefore the top priority in the development of OPT2CUT. For the first time, our software development team worked together with mathematicians from the Goethe University in Frankfurt am Main to develop OPT2CUT. Continuous practical tests on our CNC machines enabled us to achieve the optimum in the area of contour smoothing during the two-year development period of the basic program. However, development is not standing still. We are working every day to make OPT2CUT even better and faster. In the latest version, for example, the duration of the smoothing calculation has been reduced by 90% compared to the previous program version. Uneven overturning - why? Damaged rims are usually only damaged at the rim flange, i.e. the edge area of the rim. So why should a rim that is only damaged at the edge be machined over the entire surface with one and the same cutting depth, which is actually only necessary to remove the damage to the rim flange? That makes little sense! We therefore developed the "uneven overturning" process around 10 years ago, which allows us to determine a greater cutting depth in the damaged area than on the rest of the rim - without this being visible after the CNC machining of rims. With the help of "uneven overturning", also known as "Z-correction", it is therefore possible to select any cutting depth at the rim edge and only remove the clear coat from the rest of the rim so that we can guarantee a uniform turning pattern. On the one hand, this enables minimal material removal and, on the other hand, significantly faster processing, as no complete program runs are initially required for CNC polishing. With OPT2CUT CNC turning programs, we work faster and more reliably at the same time! Wheel center extension - rim flange extension When over-turning damaged alloy rims, there are often problems when bright-turned areas are artificially enlarged by the material removed during the turning process. As a result, there is excess material in the area of the wheel center, for example, which is no longer taken into account by the original CNC program. This problem can also be exacerbated if rims do not have perfect axial run-out. The contour extension option prevents such problems from the outset. OPT2CUT offers contour extension not only for the wheel center area, but also for the rim flange area. In the case of rims that have not been turned around the rim flange, the rim flange that has not been turned can also be scanned. With just a few mouse clicks, the contour is extended outwards, ensuring that the rim - as in the original - is still only turned on the flat surface. Manually insert, move and delete points OPT2CUT is CNC software co-developed by people who have been working on CNC machines for years and know exactly what perfect software needs to do to make wheel turning as easy as possible while delivering the best possible results. The CNC machining of damaged, polished rims is an individual process, as there are many different types of damage, each of which requires an individual adjustment of the contour. We have therefore designed the CNC software in such a way that the user has a maximum of intervention options. Of course, this also includes setting additional touch points and moving or deleting touch points if this is necessary for perfect contour adjustment. Individual adjustment of views, point sizes and line thicknesses Every software user has different preferences when it comes to the display within the program. OPT2CUT can therefore be changed as required and thus adapted to the needs of each user. Even when moving the points, the value by which each point is to be moved can be determined. Export function for finished turning programs When exporting the optimized turning programs, all desired parameters can be selected within the software. This means that the CNC program no longer needs to be opened in order to determine the tool, speed, feed rate or wet machining, for example. The file name is automatically adjusted if, for example, a Z correction has been carried out. Browser-based software enables use on all end devices We deliberately decided against a desktop application because, on the one hand, this enables use on all Internet-enabled end devices and, on the other hand, the entire computing power takes place on our servers. This prevents device-dependent differences in performance. Intuitive operation - no more time-consuming software training required The use of OPT2CUT is almost self-explanatory. This eliminates the need for time-consuming training and support calls. All software updates included in the price OPT2CUT is constantly being further developed to make the software even better and more efficient. All updates are included during the license period.

Pull-in plug V3 with flat collar for the inner cover of the rim hole connection | PU: 100 Color: Black Max. Temperature: 315°C The screw seat of the rim, also often called screw holes, must ALWAYS be free of paint. The plugs are the ideal solution to ensure that the bolt seat remains free of powder or wet paint during and after coating. A=32mm B=20.2mm C=3mm D=2mm E=29mm F=5mm G=40mm H=14mm I=2mm